Electrical Engg. Department

Introduction

The department was established in the year 1999. The department has strength of 7 faculties and 1 supporting staff lead by Head of department Mr. V. K. Patel. The staff is well qualified with industrial as well as academic experience. Every year pass out students are absorbed in well known industries and reputed institute for further study.

Facilities In Department

The electrical engineering department has well equipped laboratories and number of audio visual aids to bring excellence in teaching.

Laboratries
(1)Electrical M/C Lab. (2)Instrumentation Lab
(3)Basic Electrical Lab.
(4)Electrical Power System Lab.
(5)Basic Electronics & Project Lab
(6)Microprocesser & Control System Lab
(7)Project Lab
(8)Power Electronics Lab
(9)Switchgear & Protection Lab

Energy Audit Cell

                                                                                                                                                                                [Power Lab]

The department lead the energy audit cell (ENERZEE CARE TECHNOLOGY SERVICES) aimed to increase energy efficiency in industries so as to bring excellence in energy conservation and energy management.


Vision of the Department

To become a front-runner in bringing out globally competent electrical engineers, researchers, innovators and entrepreneurs to serve the global society with an ultimate aim to improve the quality of life.

Mission of the Department:

1. To give excellent understanding of electrical engineering to the students through   teaching and practice tasks that makes the students useful to the society, nation and the world.
2. To provide platform to improve designing and development skill of electrical engineering through various training, seminars, and workshops.
3. Motivate students to participate in co-curricular and extra-curricular activities to enhance leadership and managerial skills.
4. To excel career in higher education and industries, perform best by continuous learning and good conducts.

Program Outcomes (PO):

1. Basic and Discipline specific knowledge: Apply knowledge of basic mathematics, science and engineering fundamentals and engineering specialization to solve the engineering problems.
 
2. Problem analysis: Identify and analyse well-defined engineering problems using codified standard methods.
 
3. Design/ development of solutions: Design solutions for well-defined technical problems and assist with the design of systems components or processes to meet specified needs.
 
4. Engineering Tools, Experimentation and Testing: Apply modern engineering tools and appropriate technique to conduct standard tests and measurements.
 
5. Engineering practices for society, sustainability and environment: Apply appropriate technology in context of society, sustainability, environment and ethical practices.
 
6. Project ManagementUse engineering management principles individually, as a team member or a leader to manage projects and effectively communicate about well-defined engineering activities.
 
7. Life-long learning: Ability to analyse individual needs and engage in updating in the context of technological changes. 

Program Educational Objectives (PEO):

PEO1 : To demonstrate and apply excellent knowledge and skills of electrical engineering into real field with best socio-economic benefits.
PEO2 To design and implement electrical system to meet specified needs by justifying 3Es like energy efficiency, economy and environment.
PEO3 : To enhance entrepreneurial, communication and other soft skills, which will enable them to work globally as leaders or a team members.
PEO4 : To possess an positive attitude for life-long learning and practicing in the real field of work.

Program Specific Outcomes (PSO):

PSO1 : Apply knowledge and skills of electrical engineering in installation, operation and maintenance of electrical machines and power system components.
PSO2 : Design, develop and analyze the performance of various types of components and process related to the electrical engineering.
PSO3 Update and work superior in electrical system engineering with the concept of energy conservation.

Staff List

Mr. V. K. Patel
Designation  :   HOD
Education Qualification  :   B.E. Electrical, M.Tech(Gold Medalist)
Experience: -  :  20.0Years
Email  : vkp.ngpp@gmail.com
Mr. N. P. Prajapati
Designation  :    Sr. Lecturer
Education Qualification  :  B.E. Electrical, M.E.(Electrical)
Experience: -  : 16.0Year
Email  :  npp.ngpp@gmail.com
Mr. N. G. Mistry
Designation  :    Lecturer
Education Qualification  :  D.E.E.,B.E. Electrical,M.E. (Electrical)
Experience: -  :  14.07 Years
Email  :  ngm.ngpp@gmail.com
Mr. R. H. Maisuriya
Designation  :    Lecturer
Education Qualification  :   D.E.E., B.E. Electrical,M.E.
Experience: -  :  14.5 Years
Email  : rhm.ngpp@gmail.com
Mr. Y . D. Patel
Designation  :    Lecturer
Education Qualification  :   B.E. Electrical
Experience: -  :  12.3 Year
Email  : ydp.ngpp@gmail.com
Mr. N. C. Pandya
Designation  :     Lecturer
Education Qualification  :   B.E .Electronics
Experience: -  :  12.5 Years
Email  :  ncpec.ngpp@gmail.com
Mr. M. G. Vasava
Designation  :   Adhoc. Lecturer
Education Qualification  :   B.E. Power Electronics
Experience: -  :  12.3 Year
Email  :  mgv.ngpp@gmail.com
Mr. P.A. Patel
Designation  :   Sr.Lab-Asstt.
Education Qualification  : 
I.T.I./D.E.E.
Experience: -  : 20.6 Years
Email  : pap.ngpp@gmail.com
Mr. M.J. Patel
Designation  :   Lab-Attendant
Education Qualification  :  I.T.I.
Experience: -  :  20.0 Year
Email  :  mjpele.ngpp@gmail.com
Mr. Ketan Ramanandi
Designation  :   Peon
Education Qualification  :  10th Std.
Experience: -  : 0.6 Year
Email  : --

Laboratory

Electrical Lab
  [Basic Electrical Lab] [Basic Electronic & Project Lab] [Electrical Machine Lab]
[Instrumentation Lab] [Power Lab]   [Power Electronics Lab]
  [MP & CS Lab]   [Switchgear & Protection Lab]   [Project Lab]

Departmental Laboratory:


Sr. No.

Lab ID

Name of Laboratory

Major Equipment’s

1

E-6

Electrical Machines Lab

1. DC SHUNT MOTOR AND 3Ø ALTERNATOR
WITH EXCITER SET

2

E-8

Basic Electrical Lab

1. 3Ø LOADING RHEOSTATE: 3Ø, 440 V,50 Hz. 5 KW
2. CATHOD RAY OSCILLOSCOPE
RANGE - 20 MHZ ,MAKE - SCIENTECH  

3

E-16

Power System Lab

O.C.B & FEEDER PANNEL

Experiment List
download File
Experiment List

Departmental Achievements

Faculty Achievement

Sr. No.

Academic
Year

Details of Achievements

 

2005-06

Vijay K. Patel cleared exam and become Certified Energy Auditor ( CEA) by Bureau of Energy Efficiency (Government of India).

 

2007-08

Vijay K. Patel authored a book on Electrical Circuits published by Mahajan Publication, Ahmedabad.

 

2007-08

Vijay K. Patel authored a book on Fundamentals of Electrical Engineering” published by Mahajan Publication, Ahmedabad.

 

2008-09

A paper presented by Vijay K. Patel on “Analysis and Assessment of motor speed control through VFD at National Conference held at AITS, Rajkot, achieved Best Paper Presentation Award.

 

2008-9

A paper presented by Vijay K. Patel  on Cogeneration & CHP” BEE & GTZ, New Delhi awarded by First cash prize.

 

2011-12

Vijay K. Patel received Gold Medal in M. Tech (Electrical) from SVNIT, Surat.

 

2012-13

Paper published by V. K. Patel, M. A. Mulla, “Analysis and Implementation of Active Power Filter based on New Real Time Control Algorithm” in International Journal of Electrical Systems and Control (IJESC), Vol. 4, No. 2, July-December 2012, pp. 75–80

 

2012-13

Paper published by Vijay K. Patel, Implementation of Three Phase Shunt Active Power Filter Using Novel Control Technique in CPRI Journal December, 2012,Vol.8, No.4, Page No-271, ISSN 0973-0338.

 

2012-13

Vijay K. Patel works as Guide of Final year dissertation project of 03 PG students of GEC ,Valsad.

 

2013-14

Paper published by  Vijay Patel ,Priyank Dave, Kashyap Mokariya,, “Energy Conservation in centrifugal pump with variable frequency drive including SCADA, PLC and HMI” in International Journal of Innovative Research in Science, Engineering and Technology, Vol. 2, Issue 5, May 2013, pp. 1461-1468,ISSN: 2319-8753

 

2013-14

Paper published by  V. K. Patel, M. A. Mulla, “Analysis and Implementation of Active Power Filter based on New Real Time Control Algorithm” in IET Power Electronics,2013.

 

2013-14

Vijay K. Patel works as Guide of Final year dissertation project of 02 PG students of GEC ,Valsad.

 

2013-14

Vijay K. Patel works as Guide of Final year dissertation project of 05 UG students of GEC ,Valsad.

 

2013-14

N. G. Mistry Published Paper in International Conference on Research & Development in Engineering Technology & Sciences 7th April 2013, at G.K. Bharad Institute of Engineering Tramba, Rajkot on “Development of Active Suspension System for Car using Fuzzy Logic Controller, PID & Genetically optimize PID controller. 

 

2014-15

Vijay K. Patel works as Guide of Final year dissertation project of 05 UG students of GEC ,Valsad.

 

2014-15

Paper published V. K. Patel, H.J. Patel “Biomass based FBC Technology for Cogeneration Application” in Institute of Engineers (India), Raipur.

 

2014-15

A paper presented by Vijay K. Patel on “Energy Management: A management of Cost and Climate” at ICEEE, MITR, Pune

 

2014-15

A paper presented by Vijay K. Patel on “Energy Conservation and Optimization of performance in Compressed Air System’, National Conference “Energy & Nanotechnology: Strategy for the Future” (NCENSF-09), Jaipur Engineering College, Jaipur, 14-15 February, 2009.

Students Achievement

Sr. No.

Academic
Year

Details of Achievements

1

2018-19

The following students got 2nd rank in National level project competition held at BBIT, Vallabh Vidya Nagar in 2019.

Kushwaha Deepakkumar Anilkumar – 166370309029
Karne Mitesh Hanumant – 166370309026
Patel Krutik Vijaybhai - 166370309050
National Level Project Competition B.B.I.T. Creato- 2019
“Ultrasonic Blind walking stick “
Event Dt. 30 March 2019
2nd Rank  Cash prize 10000/-

2

Gujarati Hemil Niteshbhai  (156370309020)  got GTU State Level 2nd  Rank in Summer 2018 Exam 6th  semester.

3

Chaturvedi Shivam Kamleshkumar (166370309006)  got GTU State Level 4th  Rank in Summer 2018 Exam 4th  semester.

4

Prajapati Piyushkumar Bhaniram (176370309062)  got GTU State Level 2nd  Rank in Summer 2018 Exam 2nd semester.

5

Chaturvedi Shivam Kamleshkumar (166370309006)  got GTU State Level 8th  Rank in Winter 2018 Exam 5th  semester.

Department Achievement

Sr. No.

Academic
Year

Details of Achievements

1

2018-19

Electrical Engineering Department receive certificate of appreciation for participation in ”CREATO 2019” a national level project completion at BBIT-V.V. nagar on dt. 30th March 2019

Expert Speech

Expert Speech:


2018-2019

Sr.
No.

Details of Speaker

Topic
Delivered

Semester of
Student

No. of
Students

Relevance to
PO, PSO

1

Mr. C. J. Bhaidasbhai
Ex.Sr.Engineer
Locomotive shed, Valsad

Electric traction

5th

57

PO1,
PSO1

2

Mr. Bharat R. Patel
Energy Auditor
Dynamic Consultant, Ahmedabad

Detail Energy Audit

6th

57

PO1,PO2,PO4,PO5,PO6,
PSO2

3

Mr. Krunal Sailor
Senior Managager
NCVT,Surat

PLC Controllers & Automation

6th

60

PO1,PO3,
PSO2

2019-2020

Sr.
No.

Details of Speaker

Topic
Delivered

Semester of
Student

No. of
Students

Relevance to
PO,
PSO

1

Mr. C. J. Bhaidasbhai
Ex.Sr.Engineer
Locomotive shed, Valsad

Electric traction

5th

50

PO1,PO2,PO4,PO5,PO6,
PSO2

2

Mr. Vivek Suryavanshi
Engineer Service Technical
Design Tech Siemens , GEC Surat

Industrial Automation & AC Drives

5th

50

PO3,PO4,PSO1,
PSO2

3

Mr. Krunal Sailor, Mr. Sufiyan Shaikh

PLC Controllers & Automation

6th

54

PO1,PO3,
PSO2

2020-2021

Sr.
No.

Details of Speaker

Topic
Delivered

Semester of
Student

No. of
Students

Relevance to
PO, PSO

1

Milind H. Kansara                                   Asst. Professor, EED, RNGPIT, Bardoli

Microcontroller - Arduino and its Application

6TH

54

PO1,PO3,
PSO2

2

Krunal Sailor                                   Business Development Manger, NCVT, Surat

Industrila Automation

6TH

51

PO1,PO3,PSO2,
PSO3

3

Chinmay D. Shukla                                   Sr. Lecturer, Dr. S. & S.S. Gandhy College, Surat

Role of Power Electronics in
 Energy Conservation

6TH

57

PO1,PO3,
PSO3

4

Alpesh Mahyavanshi                                   Lecturer, GP, Dahod

Application of Software
in Electrical Engg.

6TH

54

PO1, PO3,PO4,
PSO2

5

Pratik D. Solanki                                   Asst. Professor, EED, RNGPIT, Bardoli

Power electronics
Devices as a Switch

6TH

54

PO1, PO3,
PSO1

6

Jignesh R.Prajapati                                   Asst. Professor, EED, RNGPIT, Bardoli

Introduction to PLC-SCADA

5TH

 

45

 

PO1, PO3,PO4,
PSO1,PSO2

7

Chaoudhary                                   International Trainer, Art of Living

How to Lead A Happy
 and Successful Life

5TH

34

PO5,PO7
PSO1

8

Ashish Sipai                                   Trainer, Surat

Pariksha ma Safalta
 ni Chavio

5TH

42

PO5,PO7
PSO1

9

R.N. Mevada   HOD, MED, Babariya Inst. Of Tech, Vadodara

Success Pitch

5TH

38

PO5,PO7
PSO1

10

Jaydip Shah                                   K.K. Wagh Inst. Of Tech. , Nashik

Electric Vehicles

5TH

98

PO1,PO3,PO4,PO7,
PSO3

11

Devendra N. Tandel                                   Asst. Prof., EED, GEC, Valsad

Rectifier Controlled
DC Motor Drives

3RD & 5TH

181

PO1, PO3,
PSO2

12

Dr. Shabbir S. Bohra                                   Prof, EED, SCET, Surat

Introduction to Simulation &
 Techno-economics analysis

3RD & 5TH

119

PO1,PO2,
PSO2

13

Nitish Tiwari                                   Asst. Manager, Sofcon Pvt. Ltd.

Microgrid

5TH

 

45

 

PO1,PO3,
PSO1

14

Ankit Dudharejiya                                   Branch Manager, Sofcon Pvt. Ltd.

 

Industrial Latest
 Technology

 

5TH

45

PO1, PO3,PO4,PO5, PO7,
PSO2,PSO3

15

Alpesh Mahyavanshi                                   Lecturer, GP, Dahod

Converter-Introduction
 and its applications

5TH

72

PO1, PO3,
PSO2

16

Jay Patel                                   Asst. Prof., EED, CGPIT, Bardoli

Selection of LV
Switchgear

5TH

88

PO1,
PSO1

17

K. C. Shah                                   Asst. Professor, EED, RNGPIT, Bardoli

Arduinio

3RD & 5TH

101

PO1, PO3, PO5,
PSO1,PSO2

18

Sachin R. Patel                                   Asst. Professor, EED, RNGPIT, Bardoli

Importance of CRGO Steel in Transformer Design

5TH

83

PO1, PO3, PO5 ,PO7,
PSO2,PSO3

19

Devendra N. Tandel                                   Asst. Prof., EED, GEC, Valsad

Fundamentals of Power Electronics

5TH

90

PO1, PO3,
PSO1,PSO2

20

Harshil S. Wani                                   Asst. Prof., EED, GEC, Valsad

DC-DC Switching Power Converters

5TH

95

PO1, PO3,
PSO1,PSO2

21

Mehul K. Tamboli                                   Asst. Professor, EED, RNGPIT, Bardoli

Basics of Industrial Automation

6TH

75

PO1, PO3,
 PSO1,PSO2

22

Tejash M. Panchal                                   Asst. Professor, EED, RNGPIT, Bardoli

Multilevel Inverters

6TH

77

PO1, PO3,
PSO1,PSO2

23

Milind H. Kansara                                   Asst. Professor, EED, RNGPIT, Bardoli

Microcontrollers & its Applications

5TH

55

PO1, PO3,
PSO1,PSO2

24

Mehul K. Tamboli                                   Asst. Professor, EED, RNGPIT, Bardoli

Power Systems & Renewable Energy

 

5TH

65

PO1, PO5, PO7,
PSO3

Industrial Visit

Industrial Visits:

2018-2019

Sr.
No.

Name of Industry

Semester of
Student

No. of
Students

Relevance to
PO, PSO

1

Patel Electric Brothers work shop
Bardoli

5TH

56

PO4,
PSO1

2

J.K.Paper Mill, Ukai

3RD & 5TH

50

PO4,
PSO1

3

Kriyfs Power Comp. Ltd - Silvasa

6TH

53

PO4,
PSO1

4

SLDC -JAMBUVA

6TH

56

PO4,
PSO1

2019-2020

Sr.
No.

Name of Industry

Semester of
Student

No. of
Students

Relevance to
PO, PSO

1

Sumul Dan Factory - Bajipura

3RD& 5TH

104

PO4,
PSO1

2

L&T Switchgear Training Center,
Baroda

6TH

49

PO1,
PSO1

2020-2021

Sr.
No.

Name of Industry

Semester of
Student

No. of
Students

Relevance to
PO, PSO

1.

NA DUE TO PANDEMIC SITUATION

 

 

 

 

 

 

 

 

Best view in 1024p X 768p Resolution

[Total View:1405]    

Best Viewed in Mozilla Firefox, Chrome, IE >8.0